The BeagleBone platform now has a community supported board support package (BSP) on Codeplex.
The BSP currently supports Windows Embedded Compact 7 with a Windows Embedded Compact2013 version in the works.
I2C, SPI, Serial and many other drivers supported. Source code available for download so you can build and customize your own image.
David, Thanks for creating and sharing the BSP! It's a great and much needed resources for the community. Sam
Re: Windows Embedded Compact 2013 on Beaglebone gets IoT sample
Please contact me regarding a full installation of this BSP for WINCE2013, and what is necessary for...
-- Aaron Peterson
Re: BeagleBone BSP code clean up
Hi David, Interest in the fully version of the image. Please let me know the commercials. I need clarification...
-- CB
Re: BeagleBone BSP gets several improvements
Hi David, How can I get a full version (without reboot) of your image available for demonstration?
-- Marco Aurélio Braun
Re: Low power operation on the community IoT Beaglebone BSP (Part 1)
Hello , dvescovi . Because of Job , I use your Beaglebone black BSP which is helpful for me . I want...
-- KevinHsu
Re: Yet Another Gotcha: Compact 7 Update
Hi David, Would you please contact me regarding the wince7 BSP for the BBB? I have a few LCD Capes...
-- trialsrideraz
Seems MS may have posed a new updated ISO on MSDN. For those without a subscription, you are still out...
-- dvescovi
Re: Power management on the Beaglebone part 2–Battery
Hi David, First of all thanks for this, blog it's been very useful. Before I go ahead and solder anything...
-- Juanes1220
Re: More improvements for Beaglebone BSP
Thank you for the fixes. The latest version builds under WEC7! Yay! Next .. have to try deploying it...
-- OzFlipper
Of course, I meant the WEC2013 SDK ... see what happens when you work with too many bits at the same...
Hi David. First, thank you for what must have been a huge amount of work. I have been trying to install...